COMBINED LINEAR AND RADIAL BALL BUSHINGS:

PDF Catalogue of Linear Bearings

These rotating and sliding ball bushings allow both types of high precision motion.

These motions can occur either separately or simultaneously. Given the same shaft size the outside diameter of these ball bushings is much smaller than a combination of a standard ball bushing and a radial ball or roller bearing

We now offer these bushes in two forms: 0662 Series with brass cage & RK series with circlip grooves in outer ring & steel cage

0662 & RK00 do not have a flange, while RK20 has a square flange but no circlip grooves. Details of RK20 are here.

PDF data sheet

rotating sliding ball bushing

Part Number (Brass cage)	Part Number (Steel cage)	d	D	B	b	Ball Races	Load C (N)	Load C₀ (N)	Max RPM	Weight kg	Circlip
0662-006		6	10	19		6	75	100	1000	0.008
	RK00-006	6	12	19	11	6	78	176	300	0.010	12X1
0662-008		8	14	23		6	140	210	750	0.014
	RK00-008	8	15	24	15	8	137	314	300	0.015	15X1
0662-012		12	19	31		8	340	540	500	0.031
	RK00-012	12	21	30	20	8	274	588	300	0.040	21X1.2
0662-016		16	25	35		8	565	890	375	0.060
	RK00-016	16	28	37	23	8	451	882	250	0.065	28X1.5
0662-020		20	30	42		8	690	1090	300	0.100
	RK00-020	20	32	42	27	8	647	1180	250	0.110	33X1.5
0662-025		25	37	54		9	880	1320	240	0.200
	RK00-025	25	40	59	37	8	882	1860	250	0.210	42X1.75
0662-030		30	42	64		9	1200	1840	200	0.270
	RK00-030	30	45	64	40.5	8	1180	2650	200	0.290	46X1.75
0662-040		40	55	78		11	2040	3200	150	0.565