HOME > VEE BEARINGS > STAINLESS STEEL
EURO-VEE - STAINLESS STEEL BEARINGS & BUSHINGS
Buy Online at our Linear Bearing Shop
Bearings:
The stainless steel vee bearings are manufactured from stainless steel grade 440C. Use with stainless steel bushes (scroll down) and corrosion resistant rails.
 |
 |
| BEARING | Weight (g) |
d (mm) |
D (mm) |
B (mm) |
A1 (mm) |
A2 (mm) |
rs (mm) |
Radial Load (kN) |
Axial Load (kN) |
| EV W1X SS | 11 | 4.763 | 19.56 | 7.87 | 7.93 | 11.86 | 0.3 | 1.0 | 0.2 |
| EV W2X SS | 38 | 9.525 | 30.73 | 11.1 | 12.7 | 18.24 | 0.3 | 2.5 | 0.5 |
EV W3X SS |
130 | 12 | 45.72 | 15.88 | 19.05 | 26.98 | 0.6 | 4.9 | 1.5 |
EV W4X SS |
280 | 15 | 59.94 | 19.05 | 25.4 | 34.93 | 1 | 8.2 | 3.5 |
Bushes:
The stainless steel bushes are available in metric sizes manufactured from grade 303.
There are two types - concentric (MB) and eccentric (MBX).
 |
 |
By rotating the eccentric (MBX) bushing on its fastener, the clearance between the wheel and track can be adjusted. This enables a preload to be applied.The concentric (MB) bush should carry the majority of the radial load.
| Concentric | Eccentric | To fit Bearing | L (mm) |
OD (mm) |
Hex (mm) | ID (mm) |
Ecc |
HH (mm) |
HOD (mm) |
Bolt |
| MB1 | MB1X | EV-W1X SS | 13.80 | 4.76 | 12 | 4.00 | 0.25 | 6.20 | 11.20 | M4 |
| MB2 | MB2X | EV-W2X SS | 17.50 | 9.52 | 14 | 6.00 | 0.61 | 6.70 | 14.20 | M6 |
| MB3 | MB3X | EV-W3X SS | 25.10 | 11.99 | 19 | 8.00 | 1.07 | 9.50 | 19.10 | M8 |
| MB4 | MB4X | EV-W4X SS | 29.90 | 15.00 | 22 | 10.00 | 1.52 | 11.1 | 22.40 | M10 |
