HOME > VEE BEARINGS > T RAIL/ TRACK
EURO-VEE BEARINGS - T RAIL
 |
 |
| T RAIL | TW (mm) |
TH (mm) |
TE (mm) |
MO (mm) |
SH (mm) |
| T1 | 11.10 |
4.75 |
3.18 |
0.79 |
1.57 |
| T2 | 15.88 |
6.35 |
4.75 |
0.79 |
2.39 |
| T3 | 22.23 |
8.71 |
6.35 |
1.60 |
2.77 |
| T4 | 26.97 |
11.10 |
7.92 |
2.39 |
3.18 |
The T rail has an induction hardened & polished 90º vee edge which fits into the 90º vee (V) of the bearings. The rail is designed to bolt onto any square edge, giving the end user total flexibility in their carriage design. Made from 1045 Carbon Steel, the body of the rail remains soft so mounting holes can easily be drilled.
By mounting 2 rails either side of a section, a fixed linear guideway is produced:
Alternatively the carriage can run between parallel rails either running in or on top of the vee:
 |
 |