HOME > VEE BEARINGS > BUSHINGS (STUDS)
EURO-VEE BEARINGS - BUSHINGS
There are 2 different types of bushings - eccentric (BX) & concentric (B). Both are made from carbon chrome steel.
 |
 |
By rotating the eccentric (BX) bushing on its fastener, the clearance between the wheel and track can be adjusted. This enables a preload to be applied. The concentric (B) bush should carry the majority of the radial load.
| Concentric | Eccentric | To fit Bearing | L (mm) |
OD (mm) |
Hex (Inch) | ID (mm) |
Ecc |
HH (mm) |
HOD (mm) |
Bolt (Inch) |
| B1 | B1X | EV-W1X | 13.97 | 4.76 | 7/16 | 3.56 | 0.30 | 6.35 | 11.18 | No 6 |
| B2 | B2X | EV-W2X | 17.93 | 9.52 | 9/16 | 6.35 | 0.61 | 7.14 | 14.22 | 1/4 |
| B3 | B3X | EV-W3X | 25.15 | 11.99 | 3/4 | 7.92 | 1.07 | 9.53 | 19.05 | 5/16 |
| B4 | B4X | EV-W4X | 29.90 | 15.00 | 7/8 | 9.53 | 1.52 | 11.1 | 22.35 | 3/8 |
 |